Garib & Garib

HOME

QUALITY CONTROL SYSTEM | REQUEST FOR A QUOTE | CONTACT

To provide our customers with a quality product, as per the standards required by them. The basic Function is to source the facility/product, which fulfils the needs of the inquiry, sent by the buyer and to place the orders on behalf of the buyer to coordinate between the buyer and the manufacturer, at various stages of the production process, ensuring that the end product meets the basic standards required.

1. RANDOM SAMPLING:

Units from each lot are drawn at random so that each unit in the lot has an equal chance (without regard to its quality) of being included in the sample. Random sampling inspection 15 a prerequisite to ensure that the sample represents the quality of the lot to a high degree

2. SELECTING RANDOM NUMBER:

Depending on the size of the shipment and specified sampling quantity. The inspector selects a cross section of cartons, from the packing list.

3. INSPECTION LEVELS:

Sampling for inspection is performed in accordance with the aql system, which is attached. SK Buying follows aql 2.5. This is an acceptable quality level standard, however each customer can specify the aql that may conform tot heir quality.

4. FINISHED MEASUREMENT/APPEARANCE:

The measurement of finished garments shall conform to the measurement specifications chart and established tolerances. A random check for appearance, shading within a garment, materlainabric defects, ironing defects and other defects as mentioned in the defects classification list, shall be performed.

5. WORKMANSHIP:

A Random check of all seams, both form inside and outside for broken stitches, open seam, puckering/pleating at seams and other stitching details. Is done. The defects found, are mark with a sticker and the garments kept in a separate carton

6. EXAMINATION OF PREPARATION FOR DELIVERY:

An examination shall be made to determine that packing, packaging and markings, comply with buyer instructions. Details on polybags should be according to requirements. Hangtags, labels etc. should be correct. The sample unit shall be one carton prepared for delivery.

7. MERCHANDISING:

Merchandising is the initial link to the complex supply management chain, and the first step to the production process. When a client approaches us with an inquiry, the best bible sources of supply for the product are ascertained by our merchandising department, inviting prices and other details.

8. TOTAL SAMPLE PROCEDURE:

Styling sample / Red seal Sample------Salesman / Sample / Proto sample / Gold Seal Sample-------Preproduction Sample-------Production Sample--------Shipping Sample.

There are basic steps to be followed prior to and during production, however each client may have their own specific requirements and our merchandising department shoulders the responsibility of staying in constant communication with the buyer, during the various stages of production.

When production commences our merchandising department works in close coordination with our quality assurance team to ensure that the end result is a quality product. Meeting the client's requirements in every respect.